Adapters

Adapters


FC ADAPTERS—Features/Specifications
Common to all FC Adapters

  • Ferrules—Precision machined zirconia
  • Universal threaded coupling
  • Available with or without bulkhead seal
  • Supports single and multi-mode fiber
  • Typical light loss < 0.5dB
  • 500 mate/demated cycles
  • Operating temperature: -67°F to 185°F
    (-55°C to 85°C) with 0.5dB maximum insertion loss
  • Pressure—1000 psig pressure with no signs of leakage
  • Bulkhead thickness—.100in to .125in
  • When used as a feedthrough one side must remain connected to maintain seal integrity

Specific—Features/Specifications
FC-DRY™—Body material: Nickel-plated brass
FC-DRY™ HP—Body material: 316 series stainless steel

Specification Download

FC_Adapter500-AFC-SS-B01-0001500-AFC-SS-N01-0001
ST ADAPTERS—Features/Specifications
Common to all ST Adapters

  • Ferrules—Precision machined zirconia
  • Available with or without bulkhead seal
  • Supports single and multi-mode fiber
  • Typical light loss < 0.5dB
  • 500 mate/demated cycles
  • Operating temperature; -67°F to 185°F
    (-55°C to 85°C) with 0.5dB maximum insertion loss
  • Pressure—1000 psig pressure with no signs of leakage
  • Bulkhead thickness—.100in to .225in
  • When used as a feedthrough one side must
    remain connected to maintain seal integrity

Specific—Features/Specifications
ST-DRY®—Body material: Nickel-plated brass
ST-DRY® HP—Body material: 316 series stainless steel

Specification Download

ST_Adapter500-AST-SS-B01-0001500-AST-SS-N01-0001

EXPORT RESTRICTIONS: These parts may be subject to the United States Munitions List (USML) and may be subject to the ITAR requirements that can be found in Subchapter M, Title 22, Code of Federal Regulations, Parts 120 through 130 (22CFR 120-130).  A license from the US Department of State may be required to Export these products.