Lancer Systems | Feedthroughs

HERMETIC FEEDTHROUGHS

FC Series PBF (Permanent Bulkhead Feedthrough)—Features/Specifications
Common to all FC Permanent Bulkhead Feedthroughs (PBF)

Ferrules—Precision machined zirconia
Body Material—316 series stainless steel
Universal threaded coupling
Supports single and multi-mode fiber
Typical light loss < 1dB
500 Mate/Demated cycles
Operating Temperature: -40°F to 185°F (-40°C to 85°C) with 0.5dB maximum insertion loss
Waterproof—100% leak tested
Pressure—1000 psig pressure with no signs of leakage
Hermetically sealed with or without connector attached, with no detectable leaks at 1x10-9 cc of helium / sec with a permeability rate of 1 X 10-7 cc of helium/sec.

Specific—Features/Specifications

FC-DRY™ HP PBF Short
- Minimum Bulkhead Thickness - .125 in
- Maximum Bulkhead Thickness - .395 in
FC-DRY™ HP PBF
- Minimum Bulkhead Thickness - .125 in
- Maximum Bulkhead Thickness - 1.000 in
FC-DRY™ HP PBF Right Angle
- Minimum Bulkhead Thickness - .125 in
- Maximum Bulkhead Thickness - .550 in

ST Series PBF (Permanent Bulkhead Feedthrough)—Features/Specifications
Common to all FC Permanent Bulkhead Feedthroughs (PBF)

Ferrules—Precision machined zirconia
Body Material—316 series stainless steel
Supports single and multi-mode fiber
Typical light loss < 1dB
500 mate/demated cycles
Operating temperature: -40°F to 185°F
(-40°C to 85°C) with 0.5dB maximum insertion loss
Waterproof—100% leak tested
Pressure—1000 psig pressure with no signs of leakage
Hermetically sealed with or without connector attached, with no detectable leaks at 1x10-9 cc of helium / sec with a permeability rate of 1 X 10-7 cc of helium/sec.

Specific—Features/Specifications

ST-DRY® HP PBF Short
- Minimum Bulkhead Thickness - .125 in
- Maximum Bulkhead Thickness - .500 in
ST-DRY® HP PBF
- Minimum Bulkhead Thickness - .125 in
- Maximum Bulkhead Thickness - 1.125 in
ST-DRY® HP PBF Right Angle
- Minimum Bulkhead Thickness - .125 in
- Maximum Bulkhead Thickness - .590 in