Lancer Systems | Adapters

HARSH ENVIRONMENT ADAPTERS

FC ADAPTERS—Features/Specifications
Common to all FC Adapters

Ferrules—Precision machined zirconia
Universal threaded coupling
Available with or without bulkhead seal
Supports single and multi-mode fiber
Typical light loss < 0.5dB
500 mate/demated cycles
Operating temperature: -67°F to 185°F
(-55°C to 85°C) with 0.5dB maximum insertion loss
Pressure—1000 psig pressure with no signs of leakage
Bulkhead thickness—.100in to .125in
When used as a feedthrough one side must remain connected to maintain seal integrity

Specific—Features/Specifications
FC-DRY™—Body material: Nickel-plated brass
FC-DRY™ HP—Body material: 316 series stainless steel

ST ADAPTERS—Features/Specifications
Common to all ST Adapters

Ferrules—Precision machined zirconia
Available with or without bulkhead seal
Supports single and multi-mode fiber
Typical light loss < 0.5dB
500 mate/demated cycles
Operating temperature; -67°F to 185°F
(-55°C to 85°C) with 0.5dB maximum insertion loss
Pressure—1000 psig pressure with no signs of leakage
Bulkhead thickness—.100in to .225in
When used as a feedthrough one side must
remain connected to maintain seal integrity

Specific—Features/Specifications
ST-DRY®—Body material: Nickel-plated brass
ST-DRY® HP—Body material: 316 series stainless steel