HARSH ENVIRONMENT 
ST AND FC CONNECTORS, FEEDTHROUGHS, ADAPTERS AND DUST CAPS
Our patented and proprietary connectors, adapters and feedthroughs ensure connectivity in the harshest of environments. When a system utilizes the total Lancer System of cable, connectors, adapters and feedthroughs our customers are ensured the highest level of environmental protection and the most reliable data transmission possible.
-
Waterproof connections—When using our connectors and feedthroughs/adapters we can
ensure a waterproof connection as each feedthrough is 100 percent leak tested.
-
Hermetic sealing—Our feedthroughs are hermetically sealed with or without the connector attached, with no detectable leaks at 1 X10-9 cc of helium/sec with a permeability rate of 1 X 10-7 cc of helium/sec.
-
Dust caps—Our dust caps provide complete environmental and waterproof sealing of the termination.
-
High-pressure sealing—Our standard feedthroughs can withstand pressures up to 1000 psi. Higher pressures can be achieved; engineering review would be required prior to specifying a high pressure.
-
No epoxy potting—Our feedthroughs, adapters and connectors, when used as complete assemblies, create watertight connections without the need for epoxy potting.
-
Patented technology—Our proprietary joining technology of the zirconia ferrules to the body ensures hermetic sealing and precision alignment to the cable connectors.
-
Wide operating temperature range—Tested for operation from –55°C to 125°C and subjected to stringent heat/humidity with minimal insertion loss.
-
Stainless steel bodies—All our feedthroughs are supplied with 316ss bodies. Our connector and adapters are available with 316ss or nickel-plated brass.
-
Up to 1.125" thick bulkheads—Our standard feedthroughs are designed to work with bulkheads up to 1.125" thick.
-
Right angle feedthroughs—Our standard right angle feedthroughs provide the same hermetic sealing and stainless steel bodies as our standard and short feedthroughs.
-
Test reports—Every connector and feedthrough adapter is 100 percent tested for light insertion loss prior to delivery; a test report accompanies every connector and feedthrough.
